Face Mask FFP2 - pack with 10 pcs

APPLICATIONS : Protection against inhalation of particles and aqueous/oily aerosols.

Check the integrity of the mask before use. If torn or stained, request a replacement mask. The indication NR in the marking indicates that the mask cannot be reused and must be discarded at the end of the work shift. The D marking indicates that the masks have passed the dolomite dust test. The protection provided by a FFP3 or FFP2 particle filtering half mask includes FFP1 class protection.

INSTRUCTIONS FOR FITTING THE FACE MASK: 1. Insert a finger into the mask. Shape the nosepiece around the finger to fit the nose. 2. Hold the mask in your hand and pull the lower elastic band over your head, behind your neck and below your ears. 3. Take the upper elastic band and place it on top of the head, above the ears. 4. 4. using both hands, shape the clip, if any, on the nose and adjust the tension of the top and bottom of the elastic with the appropriate loops, if any, so that the mask fits snugly on the face. 5. (a) Test of correct donning of the mask without valve: place hands on the mask as shown in Fig. 5 and exhale forcefully. (b) Test of the correct fitting of the mask with valve: Place your hands on the mask as shown in Fig. 5 and breathe in strongly. If air escapes from the edges of the mask or flows in from the edges within the mask, then reapply the half mask to the face and tighten the elastic if it has loops/tugs as needed. Replace the mask immediately if you have difficulty breathing or if the mask becomes damaged or does not fit snugly on your face. Following these instructions is essential for safe use of the respirator.

NOTES : [PPE - Personal Protective Equipment] If it is not possible to fit the mask to the face profile, do not enter rooms with potential risk./ Failure to follow the instructions contained in this notice may result in misuse of PPE and cause illness and death. / An appropriately selected respirator is fundamental to protecting your health. Before using the PPE, consult a person trained in industrial hygiene or experts in occupational safety to determine suitability for use. / This product does not supply oxygen. Use only in properly ventilated areas with oxygen levels sufficient for survival. Oxygen exposure limits in a given environment for use of these masks may vary from country to country. Please refer to the limits applicable to the country of use. Eleco s.r.l. does not recommend in any case the use in rooms where the oxygen concentration is lower than 19,5%. / Do not use if the pollutant concentrations are dangerous to health or life. / Do not use in explosive atmospheres. / Leave the work area immediately if (a) breathing is difficult or (b) you experience anxiety or dizziness / Whiskers and respiratory conditions may reduce the effectiveness of these filtering half masks. / Do not alter or tamper with the filtering half mask under any circumstances. / Disposable use. Maintenance free. / Dispose of the half mask after each individual use. / Store the unused half masks in their intact packaging, protected from sunlight. - The identification number of the model can be found on the package of the product.